Leveling a deck isn't just about good looks—it's about safety, durability, and pride in a job done right. At The Ultimate Deck Shop, we've seen too many Saskatchewan and Canadian DIYers get frustrated by warping boards and uneven frames, mainly because they started with the wrong tools or misunderstood how to use them. So let's get hands-on and demystify deck leveling, with a focused comparison of the trusty I-Beam vs the handy Torpedo Level. We'll also walk you through best practices for a truly level deck—something your family (and neighbours) will appreciate for years!
Why Does Deck Leveling Matter?
- Safety first: A dip or tilt is a trip hazard or, even worse, causes water pooling and long-term deck rot.
- Lifespan of materials: Composite boards and many modern railings need substructures within tight tolerances. An uneven deck can void warranties or cause panels to fail.
- Looks & resale: Nothing says "DIY disaster" like wavy handrails and creaky boards. Investing in precise leveling pays off with every backyard BBQ!
Understanding Your Tools: I-Beam vs Torpedo Levels
| Feature | I-Beam Level | Torpedo Level |
|---|---|---|
| Typical Length | 24–48 inches | 6–12 inches |
| Ideal Use | Main deck joists, long rails, beams | Tight spaces—hardware, ledger boards, stairs |
| Accuracy Range | Great for broad, sweeping checks | Pinpoint for short spans or slopes |
| Main Strength | Spans multiple joists for overall flatness | Compact, fits nearly anywhere |
| Limitations | Too big for corners or tight angles | Short—can’t ensure long joist alignment |
What’s the Real Difference?
- I-Beam levels are your go-to when you want a "big picture" sense of deck flatness, especially at the layout and framing stage.
- Torpedo levels shine for detail work—checking stairs, posts, or those tricky transition areas where an I-Beam just won't fit.
When to Use Which Level
- Setting beams or checking 3+ joists at once: I-Beam Level
- Verifying corners, brackets, or deck hardware: Torpedo Level
- Every serious deck builder (pro or DIY) should have both for a seamless workflow.
Expert Tip: Combine Levels for Best Results
Lay out your joists and use the I-Beam to identify any major "waves." But before final fastening, grab your Torpedo Level to double check connections at posts or stairs—don't let one wonky bracket undo all your good work!
Step-by-Step: How We Recommend Leveling a Deck
1. Prep and Plan
- Lay out your deck frame on leveled footings.
- Sort your joists: If you're using pressure treated lumber (as most Canadians do), sight every joist and install with the "crown" upwards to minimize future sagging.
2. Check Joist-to-Joist Flatness
- Lay your I-Beam Level across three or more joists to ensure there's no major difference.
- Spot a “rocker” or a "valley"? Now’s the time to fix it—don’t get halfway through deck board installation first!
- If you have local variations, use shims or notch thick joists as needed. Professional deck builders often use composite shims (available in packs at The Ultimate Deck Shop) for small adjustments.
3. Dial It In with a Torpedo Level
- Switch to your torpedo for tricky corners, stair rails, or where joists meet rim boards. Its compact size means you can check level in tight or awkward spots—critical for safety and seamless board installation!
4. Secure and Double-Check
- Once you're satisfied, fasten your joists and beams. We recommend going row by row, checking as you go—it’s easier to fix small wobbles than a whole crooked deck later!
- Install blocking or bridging mid-span for extra flatness, especially if you’re using composite boards.
Common DIY Deck Leveling Mistakes (And How to Avoid Them)
- Only checking level at the ends of joists: Decks can curve or dip in the middle—always check across multiple points.
- Over-tightening or "bending" the level: Levels are precise tools. Using them as a pry bar or hammer throws off accuracy.
- Ignoring small variations: A 1/16" difference may not seem like much, but it multiplies across your deck. Small shims can make a world of difference.
Pro-Level Tips We Share With Contractors and DIYers Alike
- Pick your best lumber for visible areas. Hide any bowed or rough pieces where they’ll do least harm—behind ledger boards or under stairs.
- Combine tools for each stage: Big spans? Use the I-Beam. Stairs or hardware? Torpedo. Both are in our handy level sets for a reason.
- Plan for drainage: Some joists (like for rooftop decks) will need deliberate slope. Torpedo levels with angle vials help you set that exact pitch.
Deck Leveling Toolkit Essentials—What We Recommend at The Ultimate Deck Shop
- ROK 48" I-Beam Level – robust, reliable, and long enough for framing almost any deck size.
- ROK Budget Level Set 2-piece (48" + Torpedo) – perfect for both rough framing and finishing touches.
- Composite shims, specialty deck screws, and a sharp eye!
Why Trust Us?
Every day at our Regina and Saskatoon locations, we see homeowners and contractors come in with deck photos, questions, and (sometimes) panicked looks. We’ve walked thousands of people—beginners to pros—through exactly these steps. Our team has the material and product experience to help you choose the right level for your next job, with honest, hands-on advice you won’t find at the big box stores (see our real customer reviews!).
The Bottom Line: Level Once, Enjoy for Years
Getting your deck level isn’t about owning the most expensive tools, but using the right tool at the right stage. Use an I-Beam level for the big picture, a torpedo for the details, and don’t be afraid to reach out for advice—it’s what we’re here for. Visit us in Regina or Saskatoon, or check out our full range of levels and deck building accessories online.
For more guidance, pro tips, or to shop in-stock tools and shims, explore our extensive DIY deck resources at The Ultimate Deck Shop. Building your backyard dream? We’re here to make sure it stands the test of time—and levels.
