In Canadian decking, concrete deck blocks play a specific but limited role. They are pre-formed concrete bases intended to support ground-level, unattached decks, shed floors, or light structures in residential backyards. Their appeal lies in the quick installation and low upfront cost, especially for small DIY projects. At The Ultimate Deck Shop, our team routinely guides homeowners and contractors through the practical uses and important limitations of concrete deck blocks, ensuring the right support system is selected for both safety and long-term performance.
For most Canadian municipalities, concrete deck blocks are allowable only for connected, ground-level decks that do not require deep footings or bear substantial loads. This limitation is due to climate, frost heave, structural code, and safety considerations. For attached, elevated, or permitted structural decks, poured concrete footings or engineered supports (such as screw piles) are typically required by code.
What Are Concrete Deck Blocks?
Concrete deck blocks (often called "elephant feet," "pyramid blocks," or simply "deck blocks") are solid precast units designed to support vertical posts or beams for decks and light outdoor projects. Blocks feature molded recesses or notches that stabilize 4x4 or 6x6 posts, beams, or joists directly above.
The Ultimate Deck Shop stocks a full range of deck blocks, including the Deck Block 10x10x7, which is commonly used for rapid prototyping, floating decks, and non-permit structures that stay low to the ground.
Technical Definition
- Material: High-strength precast concrete
- Typical Applications: Floating, unanchored, ground-level decks; shed bases; temporary structures; garden stairs
- Attachment: Accepts 4x4 or (occasionally) 6x6 posts and some accept joist members directly
- Building Code: Use is limited by local codes based on deck size, height, connection, and load
When Are Concrete Deck Blocks Appropriate?
At The Ultimate Deck Shop, we recommend concrete deck blocks for small, freestanding structures that:
- Are not physically attached to a house or permanent building
- Are located on stable, well-drained soil
- Remain below a defined height threshold (often 24 inches above grade or as specified by local code)
- Do not require a municipal building permit or engineered footings
Examples include backyard platform decks for above-ground pools, movable gazebo bases, potting tables, or tool sheds. Homeowners often use deck blocks where minimal excavation, no heavy concrete mixing, and a quick build timeline are priorities.
Step-by-Step: Installing a Deck with Concrete Deck Blocks
- Site Preparation: Mark the planned deck footprint. For best results, remove sod and level the site thoroughly. Good soil drainage and consistent grade help prevent movement.
- Layout: Place deck blocks according to your framing plan, spacing them in line with joist and beam requirements. Use a string line or laser level for accuracy.
- Base Material (optional): For added stability, set each block on a compacted gravel base to promote drainage and inhibit frost heave.
- Frame Support: Insert beams or posts into the slots on each block. Secure with adjustable post saddles if required. Double-check for level and alignment.
- Joist Framing: Build your frame on top of the supported beams/posts. Ensure all connections comply with local structural requirements.
- Check Stability: Test for movement before decking is installed. Adjust as needed before fastening deck boards.
- Final Inspection: Consider wind uplift, soil movement, and ensure no block is overloaded. Keep all wood members clear of direct contact with soil or organic matter.
Limits and Drawbacks of Concrete Deck Blocks in Canada
While concrete deck blocks offer convenience, The Ultimate Deck Shop stresses their distinct limitations:
- Frost Heave Risk: Blocks placed on or near the soil surface are vulnerable to shifting during Canadian freeze–thaw cycles, which can lead to uneven settling and deck movement. Unless set on a deep, compacted gravel pad, frost heave remains a significant risk.
- Load Capacity: Deck blocks are suitable only for light to moderate loads. Large, multi-story decks, hot tubs, or heavy structures require engineered footings.
- Building Code Compliance: Most building authorities restrict deck block use to small, detached, ground-level decks only. Attaching a deck or exceeding allowed heights triggers the need for full-depth footings.
- Longevity: Movement over time can compromise the structure. Deck blocks do not tie into the frost line and may need to be realigned or reset in the future.
- Not Suitable for Guard Rails: Decks with railing requirements (due to height) usually cannot use deck blocks for structural posts, as blocks do not provide enough lateral resistance against wind or impact loads.
Common Mistakes When Using Concrete Deck Blocks
- Skipping Site Preparation: Placing blocks directly on grass or unprepared soil almost guarantees future movement.
- Ignoring Drainage: Water pooling around blocks can lead to frost heave and accelerate rot in wood members above.
- Improper Layout: Failing to level and align blocks before framing leads to uneven decks and tricky retrofits.
- Overloading Blocks: Using too few blocks for the deck size or spacing them too far apart causes sagging and instability.
- Assuming Suitability for All Designs: Using deck blocks for attached, elevated, or railing-supported decks puts your project at risk of failure and code violations.
- Poor Termite and Rot Prevention: Placing wood directly in contact with soil can invite rot and pest damage. Always isolate with approved hardware or pads.
Alternatives to Deck Blocks for Canadian Deck Builds
When code, load, or long-term durability are factors, The Ultimate Deck Shop helps customers navigate suitable alternatives:
- Poured Concrete Footings: Standard for all attached, elevated, or large deck structures. Extend below frost line for stability.
- Helical Screw Piles: Engineered and installed for load, frost protection, and long-term stability—an increasingly common solution in cold climates.
- Adjustable Post Bases: Paired with either poured piers, precast footings, or screw piles, these allow fine-tuned leveling during install.
For an in-depth comparison of deck foundations, see our guide on Deck Foundation Screws vs Deck Blocks: Which Base Fits Your Backyard Build.
If you’re unsure which support best fits your needs, our blog What store can help me figure out whether I need deck blocks, adjustable supports, or screw piles before I order materials? breaks down the process and shows how our specialists guide you from planning to purchase.
Best Practices from The Ultimate Deck Shop
- Always Confirm Local Code: Regulations for deck blocks vary by city or municipality. Check with your local building authority or ask our in-store specialists for advice on compliance.
- Prepare and Level the Site: Dig down to remove sod and topsoil. Use compacted gravel or sand pads for each block. Laser or string level the entire layout before framing starts.
- Use Enough Blocks: More blocks = better weight distribution and improved deck stability. Err on the side of more blocks for larger decks.
- Isolate Wood from Soil: Prevent moisture damage by ensuring all wood structural members are separated from direct earth contact. Use metal brackets, pads, or post anchors.
- Allow for Future Adjustment: Expect minor shifting over time in regions with deep frost. Design frames to be easily realigned or blocks to be re-leveled as needed.
- Protect Exposed Framing: Use joist protection tape or coatings to guard wood from moisture and decay, even at ground level. These easy upgrades can significantly extend the deck’s lifespan. For product suggestions and how-to guides, see our detailed guide to deck frame protection.
Relevant Product Examples
Deck slabs can be used in addition to deck blocks, especially for supporting shed floors or as step pads to distribute loads over a wider area.
Summary Table: Concrete Deck Blocks vs Other Footing Options
| Support Type | Best For | Frost Protection | Building Permit? |
|---|---|---|---|
| Concrete Deck Block | Ground-level, unattached, non-permitted decks | Low (surface only) | Rarely allowed for attached/elevated decks |
| Poured Footing | Attached, elevated, large or permitted decks | High (below frost line) | Almost always required |
| Screw Pile | Most decks, especially on clay or wet soil | High (adjustable, engineered) | Accepted in most jurisdictions |
| Deck Slab | Sheds, steps, hot tub pads (not for deck frames) | Low to None | Not for structural deck use |
Frequently Asked Questions
Can I use deck blocks for my attached backyard deck in Canada?
Most Canadian building codes do not permit deck blocks for attached or elevated decks. These projects require full-depth concrete footings or engineered alternatives for frost and load safety. If in doubt, consult your local building authority or the experts at The Ultimate Deck Shop.
How many deck blocks do I need?
The number depends on deck size, load, and joist configuration. A common approach is to place blocks every 4 to 6 feet along beams and joists, but more may be needed for larger or heavier decks. We recommend working with a deck design specialist to avoid overloading any single block.
Do deck blocks move during winter?
Yes, if installed directly on soil, deck blocks are susceptible to frost heave, which can cause the deck to shift or lift unevenly. This risk is greatest in regions with deep frost and poorly drained soil. Setting blocks on a compacted gravel pad can help, but ground movement remains possible.
Is a gravel base under deck blocks necessary?
While not always required by code, a well-compacted gravel base improves drainage, reduces frost heave risk, and adds stability to deck block installations. We strongly advise it for any long-term project in Canada.
What’s the difference between deck blocks and deck slabs?
Deck blocks are designed for upright structural support of posts or beams for deck framing. Deck slabs are large, flat concrete pads used for shed bases, step pads, or non-structural surfaces. Do not use slabs as structural deck footings.
When should I consider screw piles or concrete footings instead?
If your deck is attached to a house, exceeds ground-level height, bears heavy loads, or requires a permit, screw piles or full-depth footings are generally necessary. For more detail, our team at The Ultimate Deck Shop can help you choose and price the right option.
Can I retrofit deck blocks for a structure that’s moving?
Minor relabeling or pad addition can help, but if a deck on blocks is repeatedly shifting, this usually indicates deeper footing or a screw pile solution is needed for lasting stability.
Conclusion
Concrete deck blocks offer convenience for a narrow set of projects, but their practical limits are shaped by Canadian climate and building codes. When selecting a deck foundation, assess project size, legal requirements, and future maintenance. The expert team at The Ultimate Deck Shop supports you with planning, layout advice, a wide selection of deck blocks, and reliable alternatives for every type of structure.
Ready for detailed help? You can connect with us directly online or in store for personalized advice tailored to your site, local code, and structural needs. For more in-depth how-tos on deck footings and framing, explore our related blog: How to Choose Deck Blocks for 4x4 and 6x6 Posts: Codes, Tips & Product Examples.
